Home > News > Content

Centrifugal pump cutting and modification technology

Sep 05, 2025

Centrifugal pumps account for the largest proportion among various types of pumps and are the main fluid transportation equipment in the petrochemical production process. In the past, when designers selected centrifugal pumps, they often left a considerable design margin. The "big horse pulling a small cart" phenomenon caused by excessive design margin in the Nantong Petrochemical Company alone consumed an additional 52.6 million kilowatt-hours of electricity in 2010, resulting in serious energy waste.

The working principle of a centrifugal pump is to increase the mechanical energy of the fluid flowing through the impeller by applying centrifugal force. This is done to overcome the mechanical energy losses during the fluid transportation process. The energy-saving and consumption-reducing measures typically adopted are variable frequency control and impeller cutting. However, variable frequency speed regulation has limitations, including high investment, high maintenance costs, and a decrease in operational efficiency when the centrifugal pump operates at a significantly changed speed.

In contrast, the impeller cutting method is simple and convenient to implement, with low consumption and quick results. It only requires calculating the cutting amount of the pump impeller and then carrying out the cutting transformation. After calculation and assessment of economic rationality, it can be put into implementation.

The technicians of Nantong Petrochemical Branch adopted a solution of changing the pump body structure - cutting the impeller to reduce power and save electricity. After one cut of the impeller, the diameter of the pump's impeller was reduced from the original 324 millimeters to 290 millimeters. At the same time, the head decreased from 140 meters to 112.16 meters. After the cut, the power was 79.9 kilowatts, a reduction of 30.1 kilowatts. The flow rate was 183.3 to 222.4 cubic meters per hour, meeting the on-site process requirements.

Based on the successful experience of the B-202 project, the technicians further popularized the method of impeller cutting and adopted standardized, procedural and regulated approaches. A total of 15 units of this type of centrifugal pump were renovated, resulting in an annual electricity saving of 10,836 kilowatt-hours.

According to incomplete statistics, before the implementation of various centrifugal pump cutting and renovation projects, the annual electricity consumption was 865 million kilowatt-hours. After the renovation, the electricity consumption decreased to 822 million kilowatt-hours, resulting in an annual economic benefit of 220,000 yuan. Thus, it can be seen that implementing centrifugal pump cutting and renovation is an important technical means for enterprises to reduce "big expenses", improve operational efficiency, and lower energy consumption.

Send Inquiry