Home > News > Content

Extending The Service Life Of Submersible Centrifugal Pumps

Nov 06, 2026

People often ask, "What can operations and maintenance personnel do to extend the life of a submersible centrifugal pump?" Although maintenance and operating staff have a great deal to do with the service life of a submersible centrifugal pump, they influence only about 50% of the important factors.

Before maintenance personnel are ever involved, two key factors already affect the pump's expected life. Pump selection and project design, together with correct installation of the equipment, are the keys to ensuring the pump's success.

Pump selection

Pump selection is critical to the expected life of a submersible centrifugal pump. The main factors to consider when initially selecting a pump include:

Initial pump design

The expected performance of the pump

The number of pumps required for the initial installation

The pump sequence (duty/standby arrangement)

Whether the system is combined with other systems

The products connected to the pumping system and other necessary equipment

Type of voltage

Motor protection devices

All of these items, and more, play an important role in the expected life of the pumping equipment. All of them must be carefully evaluated, and correct installation does a great deal to extend the service life of a submersible centrifugal pump.

Installation

It is important to evaluate how the original contractor installs the project, along with the plans and specifications. These plans let us see the changes required - for example, the mitigation needed because of a change in the routing of the main forces - and how those changes will affect the entire pumping system. Beyond that, pressure gauges are also needed, and they must be installed correctly.

Environmental issues surrounding the installation of the pump system affect expected life. One major environmental factor is sand. Introducing sand/gravel into a pumping application wears rotating parts faster than in soils without sand or gravel.

The installation of the entire piping run also affects the equipment's expected life. Have appropriate measures been taken to install the piping correctly? Are air release valves properly installed at all high points of the piping system?

Startup is the last part of the installation process. It allows confirmation of the correct voltage, pump rotation and general functioning of the station. Once this is done, record the startup procedure, control panel voltage, amperage, and so on. Establish a baseline for pump operation. (The original text here also invites readers to follow the "Pump Friends Circle" WeChat account.) Verify that all motor protection devices are correctly connected. Finally, make sure all parts are correctly installed.

General maintenance

As operations and maintenance personnel take over their new pumping system, they must determine the general maintenance required to ensure long-term, trouble-free operation of the equipment. General/routine maintenance varies by manufacturer and equipment type, but the following maintenance measures are recommended:

Routine maintenance

Daily - carry out routine checks such as leak checks, vibration analysis, temperature and discharge pressure checks, and oil level and condition checks.

Monthly/quarterly - perform monthly and/or quarterly maintenance to ensure the pump is tightened down, the mechanical seal is intact, the shaft is correctly positioned, and the oil is not contaminated or in need of replacement. Verify the clearances between wearing surfaces recommended by the manufacturer, and correct the clearance if it is outside the recommended dimensions.

Annually - check pump capacity, pressure and power every year. Compare the performance of these indicators with your process requirements. If performance does not match, the pump must be disassembled, thoroughly inspected, and worn parts replaced as necessary.

Types of maintenance

Preventive maintenance - scheduled maintenance performed on equipment to reduce the likelihood of equipment failure. It is carried out while the equipment is still working, so that it is not accidentally damaged.

Predictive maintenance - a technique that uses condition monitoring tools and techniques to track equipment performance during normal operation, in order to detect possible defects and correct them before they cause a failure.

Reactive maintenance - repair carried out after the equipment has already failed, with the aim of returning it to normal operating condition.

Continuous diagnostic maintenance - the process of monitoring machine condition parameters (vibration, temperature, etc.) in order to identify significant changes that indicate a developing fault. Condition monitoring can be used to schedule maintenance, or other measures can be taken to prevent consequential damage. Condition monitoring helps address the problem of shortened equipment life. These techniques are commonly used on rotating equipment, auxiliary systems and other machinery such as compressors, pumps, electric motors, internal combustion engines and presses.

Historical maintenance - using the schedule of all maintenance performed on a piece of equipment and scheduling maintenance based on historical data, in an attempt to service the equipment within the recorded time frame before a failure occurs.

OEM parts

The use of original equipment manufacturer (OEM) parts is essential to extending the life of a submersible centrifugal pump. Some of the main reasons for using OEM parts include the manufacturer's warranty, conformance to specifications and tolerances, material shelf life, and avoiding inaccurate copies of original parts.

Not using OEM parts can void the manufacturer's warranty. It can also affect the pump's specifications and tolerances, because the parts do not align perfectly. Non-OEM parts are often copies of the original parts. When a copy is made, it may be produced from old/worn parts, from an unsuitable version, or from materials different from those of the original manufacturer.

Although non-OEM parts have the appeal of lower cost, this may be only a short-term saving. In the long run, such parts may cause other complications that require more maintenance and expense over the life of the equipment.

Conclusion

To properly extend the life of a submersible centrifugal pump, appropriate measures must be taken. Correct installation, routine maintenance and the use of OEM parts are essential to the health and overall function of the pump.

news-2000-2000

Send Inquiry