Pipeline Pump For Industrial Water Supply And Circulation

The ISW type horizontal pipeline pump is a product developed by our unit's technical staff in collaboration with domestic experts in pump engineering. It adopts the performance parameters of the IS type centrifugal pump and is ingeniously combined and designed based on the general horizontal pump. At the same time, according to different usage temperatures and media, it has been derived into applicable hot water, high-temperature corrosion-resistant chemical pumps, oil pumps, etc. of ALG type. This series of horizontal pipeline pump products have the advantages of high efficiency, energy saving, low noise, and reliable performance.
Model Meaning of Horizontal Pipeline Pumps
Main Applications of Horizontal Pipeline Pumps 1. ISW horizontal clear water pump, used for transporting clear water and other liquids with physical and chemical properties similar to clear water. It is suitable for industrial and urban water supply and drainage, high-rise building booster water supply, garden sprinkling, fire booster, long-distance transportation, heating and ventilation refrigeration circulation, bathroom cold and hot water circulation booster and equipment matching, with a usage temperature of T ≤ 80℃. 20℃. Working Conditions of Horizontal Pipeline Pumps 1. The suction pressure is ≤ 1.0 MPa, or the maximum working pressure of the pump system is ≤ 1.6 MPa, that is, the suction pressure + pump head ≤ 1.6 MPa, the pump static test pressure is ≤ 2.5 MPa. Please specify the system working pressure when placing an order. When the pump system working pressure is greater than 1.6 MPa, it should be separately proposed when placing an order to facilitate the use of cast steel materials for the flow passage and connection parts during manufacturing. 2. The environmental temperature is < 40℃, the relative humidity is < 40%. 3. The solid particle volume content in the medium being transported does not exceed 0.1 per unit volume, and the particle size is < 0.2 mm. Note: If the medium contains fine particles, please specify when placing an order to ensure that the manufacturer uses wear-resistant mechanical seals. Features Smooth operation: The absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without vibration. No dripping: Different materials of hard alloys ensure no leakage in different medium transportation. Low noise: The pump is supported by two low-noise bearings, running smoothly, with only the slight sound of the motor, basically no noise. Low failure rate: The structure is simple and reasonable, and key parts are matched with international first-class quality, greatly increasing the no-fault working time of the entire machine. Easy maintenance: Replacing seals and bearings is simple and convenient. More space-saving: The outlet can be directed to the left, right, or upward, facilitating pipeline layout and installation, and saving space.

1. ISW horizontal water pump is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building booster water supply, garden sprinkler irrigation, fire booster, long-distance transportation, HVAC refrigeration circulation, cold and hot water circulation booster for bathrooms and other equipment matching. The operating temperature T ≤ 80℃.
20℃.
Horizontal pipeline pump Working conditions
1. The suction pressure should be ≤ 1.0 MPa, or the maximum working pressure of the pump system should be ≤ 1.6 MPa. That is, the sum of the suction inlet pressure and the pump head should be ≤ 1.6 MPa, and the static pressure test pressure of the pump should be ≤ 2.5 MPa. Please specify the system working pressure when placing an order. When the working pressure of the pump system is greater than 1.6 MPa, it should be separately stated when placing the order so that the flow parts and connection parts of the pump can be made of cast steel materials during manufacturing.
2. The ambient temperature should be < 40℃, and the relative humidity should be < 40%.
3. The volume content of solid particles in the conveyed medium should not exceed 0.1 per unit volume, and the particle size should be < 0.2 mm.
Note: If the medium contains fine particles, please specify when placing the order so that the manufacturer can use wear-resistant mechanical seals.